Contact Us

ebay@rfsupplier.com

Product Catalogue
RF Connector SSMB thru hole Jack Right Angle PCB Mount with solder post
Model: S10-RJPT4-11BS00
    QTY 1+10+100+500+ More
    Price each. $2.00$1.80$1.62$1.46 Ask
    Saving% 0% 10%19%27% Ask
Description
Product parameters:
    Product Series: SSMB  Product Type: PCB Mount 
    PCB size: Thru Hole PCB Mount  Body Plating: Goldplated 
    Gender: Jack  Connector Body Style: Right Angle 
    Insulator: Teflon (PTFE)  Connector Material: Brass 
    Impedance: 50 Ohm  Contact Plating: Goldplated 

SSMB RF connectors are microminiature devices that provide repeatable electrical performance from DC to 3GHz. The standard mating design for SSMB series connectors are similar to SMB and SMC but with size reduced approximately one-third. This makes them ideal for use in confined areas where the use of wrenches is not practical. They are lightweight, easy to connect and disconnect, vibration-proof and highly reliable. They are best suited for use with cables in the range of .070" to .120" diameters, such as RG-178, RG-174, and RG-316. Because of their small-size and tight tolerance, finishes other than gold plating are not recommended.

 

SSMB type connectors have gained wide acceptance and usage in military radio systems, where small size is needed for miniaturization but ruggedness and reliability are very important.

 


Impedance 50 ohm  
Frequency Range  DC to 3 GHz  
Dielectric Withstanding Voltage (at sea level, in V rms, 50 Hz)  500 max  
Working Voltage(at sea level, in V rms, 50 Hz)  250 max  
Insulation Resistance  1000 M min  
RF Leakage  -70 dB min @ 2-3 GHz  
VSWR  Straight          Right Angle
 1.22 max @ 0-1.0 GHz  1.50 max @ 0-1.0 GHz
 1.35 max @ 0-3.0 GHz  1.63 max @ 0-3.0 GHz
Contact Resistance  Center Contact  Outer Contact
                        5 m max    2.5 m max
Mating  Snap-on coupling
Durability  500 matings max
Engagement/Disengagement Force 6 lbs max engagement/1 lb min disengagement
Contact Captivation   2 lbs min axial force
Temperature Range  -55C to +155C

 

                        Material          Plating
Connector Body   Brass per QQ-B-626     Gold/Nickel
Center Contact  Male  Brass per QQ-B-626  Gold
        Female  Beryllium Copper per QQ-C-530  Gold
Insulator  Teflon  
Gasket Silicone Rubber
Crimp Ferrule  Annealed Copper per WW-T-799  Same as body

Reviews
No comments