| RF Connector |
|
| RF Adapter |
| RF Coax Cable |
| Crimp Tool |
| GSM/3G/4G Antenna |
| GPS Antenna |
| Wifi Antenna |
| Other Antenna |
| Enclosure,Box,&Case |
| Solar Panel Connectors & Cables |
| POE and Parts |
| Coaxial Attenuator |
| RF termination |
| Power Splitter |
| Repeater Amplifier |
| Surge Protector |
| Others |
| Other Electronic Products |
- Home
- >
- RF Adapter
- >
- Between Series
- >
Product parameters:
| Convert From(Adapter End): | N Jack | Convert To (Adapter End): | UHF Plug |
| Impedance: | 50 Ohm | Body Plating: | Nickelplated |
| Operating Temperature: | -55 °C to +155°C | Contact Plating: | Goldplated |
| Body Material: | Brass | VSWR @ 1GHz: | <1.3:1 |
| Frenquency Range: | DC-300MHz | Operating Voltage Max: | 500V peak |
| IL @ 1GHz: | <0.50dB | Outer Contact Resistance: | ≦0.5mΩ |
| Center Contact Resistance: | ≦1.5mΩ | Dutability (Mating): | ≦500 cycles |
| Insulation Resistance: | ≧5000mΩ | : |
RF adapters cost effective solution,which is high quality and quick combinations by simply screwing two connectors together, with no soldering or crimping required.
RF adapter product line includes in-series RF adapters design and between series adapter designs as well as T and Cross RF adapters.
Interface types are included in RF adapter ,such as SMA, TNC, N and BNC,which are available in male, female, plug, jack, receptacle gender, in 50 Ohm &75 Ohm impedance and in standard polarity or reverse polarity.
RF adapters are available in quick disconnect (QD), push-on or standard interface , straight, 90 degrees versions,as well as bulkhead ,or 4 hole panel configurations.
RF adapters in standard and high performance with brass body .The stainless steel body will be customized !
